ToupTek RotaTilter: Set with M48 or M54 Adapter

The ToupTek RotaTilter assembly is available with an M48 or M54 adapter. Select the connector that matches your setup from the options.

ToupTek presents the RotaTilter as a rotation and tilt adjustment device for use with the HOPE D60 sight. Rotation refers to the orientation of the frame, while tilt adjustment refers to the alignment of the image plane. These functions must be distinguished during installation: adjusting the frame and correcting the sensor’s tilt serve different purposes.

Setup and Use

This product sheet lists two configurations. The first combines the RotaTilter with an M48 adapter; the second combines it with an M54 adapter. The selection refers to the adapter included with the set, not to two accessories to be purchased simultaneously. Before selecting an option, identify the mounting connector to which you wish to attach it and the rings already present in your optical train.

The designations M48 and M54 are not sufficient to describe an entire optical chain. It is also necessary to check the interfaces on each end and the space occupied by the other components. This data sheet therefore does not imply universal compatibility for the entire assembly. An assembly that includes a camera, a slide, or an optical splitter must be evaluated as a whole, rather than based solely on the diameter visible on any single component.

The product offered is the RotaTilter kit with the selected adapter. It does not include the HOPE D60 eyepiece or the camera used for imaging. The manufacturer describes the RotaTilter as an alignment accessory; no correction range, angular accuracy, or unconfirmed thickness is specified here. To prepare for installation, refer to the relevant assembly diagram and verify the interfaces if your configuration differs from the one presented by ToupTek. This verification ensures you select the appropriate option without assuming that the two connectors are interchangeable in your setup.

Technical specifications