This PrimaLuceLab cable supplies power from the EAGLE to a device with a 5.5/2.5 mm plug, with the positive terminal in the center.
CHF 39.00incl. Swiss VAT
Reference PL1000044
Will be ordered for you
Timeframe: 10 days to 3 weeks
Estimated shipping: Between November 21 and 26, 2026
This PrimaLuceLab cable supplies power from the EAGLE to a device with a 5.5/2.5 mm plug, with the positive terminal in the center.
The screw connection on the EAGLE side helps prevent accidental disconnections.
The two dimensions refer to the plug’s outer diameter and inner diameter, respectively. The polarity is positive at the center. To ensure the connection is correct, you must therefore check the dimensions, the required voltage, the polarity, and the device’s power consumption: a similar diameter alone is not enough to guarantee compatibility.
The cable is designed for an EAGLE 3 A output. This port class should not be confused with a current imposed on the device. The cable provides power; it does not replace a USB connection or any other control connection.
| Reference | PL1000044 |
|---|---|
| Device Connector | 5.5 / 2.5 mm |
| Polarity | Positive in the center |
| Length | 115 cm |
| Port EAGLE | 3 A |
