Spacers wider than 10 mm create clearance between two mechanical components, such as between a rod and support clamps. They are used to prevent a component from coming into contact with an adjacent part in a multi-instrument assembly.
CHF 25.00incl. Swiss VAT
Reference PLLSPES10
Will be ordered for you
Timeframe: 10 days to 3 weeks
Estimated shipping: Between November 26 and December 1, 2026
Spacers wider than 10 mm create clearance between two mechanical components, such as between a rod and support clamps. They are used to prevent a component from coming into contact with an adjacent part in a multi-instrument assembly.
The four holes have two different center-to-center distances: 20 mm for Vixen PLUS bars and guide clamps, and 55 mm for Losmandy PLUS bars. The added height must be taken into account in the mount’s geometry and when routing accessories.
The manufacturer provides four M6 screws, 20 mm long, to replace the shorter fasteners at the specified locations. The bars and clamps shown in the examples are the parts between which the spacers are installed; they are not included in this part number. Since the quantity of spacers is not specified in the text, only the quantity of screws is listed here.
| Reference | PLLSPES10 |
|---|---|
| Thickness | 10 mm |
| Drill Holes | 4 holes |
| Vixen Center Distance / Guiding | 20 mm |
| Losmandy Center-to-Center Distance | 55 mm |
| Screws included | 4 M6×20 screws |
