Takahashi Ortho 2x Barlow lens with two elements in a single group. 31.75 mm slip-on input, 31.75 mm female output, and M42x0.75 male T-thread. Part number TKA00598.
CHF 119.34incl. Swiss VAT
Reference TKA00598
Will be ordered for you
Delivery time: 5 to 7 business days
Estimated shipping: Between November 24 and 25, 2026
The Takahashi Ortho 2x is a Barlow lens designed to increase the focal length of the instrument to which it is attached. Part number TKA00598 consists of two lenses combined into a single group. It features a 31.75 mm slip-on input and two output connection options: a 31.75 mm female socket for the eyepiece and an M42x0.75 male T-thread for a screw-on mount.
The T-thread allows for the screw-on attachment of a camera or camera housing. For a camera body, Takahashi specifies that a T-ring compatible with your camera brand must be added. This interface does not mean, therefore, that all necessary adapters are included with the Barlow lens. Before assembling the optical train, check the connection type and sensor position that correspond to your equipment.
The “2x” designation corresponds to the nominal magnification listed in the manufacturer’s table. Takahashi notes, however, that the magnification varies with the focal length. The distance to consider is that between the end of the T-thread and the sensor surface, or the entrance pupil of the eyepiece for visual observation. A photographic setup should therefore not automatically be considered a strict doubling of the focal length. Determine your configuration based on this distance rather than solely on the “2x” marking.
Takahashi describes a design that takes the entire optical chain into account and specifically mentions its use with TPL eyepieces. This information does not constitute a promise of universal correction for every instrument. The body has a diameter of 46 mm and a length of 91 mm, with a stated weight of 130 g. These specifications allow for mechanical integration without confusing the weight of the Barlow lens with that of the added adapters and sensor.
| Features | Value |
|---|---|
| Reference | TKA00598 |
| Design | 1 set of 2 lenses |
| Magnification Ratio | 2x |
| Mechanical Input Interface | 1.25" (31.75 mm) male fitting |
| Mechanical Output Interface | 1.25" (31.75 mm) female coupler + male T-thread (M42x0.75) |
| Dimensions | Diameter 46 mm, length 91 mm |
| Weight | 130 g |
This part number refers to the Takahashi Ortho 2x Barlow lens (TKA00598). No eyepiece, camera, camera body, or T-ring is included in the advertised package. The choice of adapters depends on the mounting configuration selected.
Manufacturer's part number: TKA00598. Takahashi's Official Profile.