Takahashi 95S mount, inner diameter 95 mm, weight 800 g. Compatible models: Takahashi FC-76DS, FC-100 (all models except DL), and FSQ-85EDX.
CHF 148.73incl. Swiss VAT
Part Number TKA21420
Will be ordered for you
Delivery time: 5 to 7 business days
Estimated shipping: Between November 23 and 24, 2026
The Takahashi 95S collar is a one-piece mount designed to secure an optical tube to a telescope mount. This model has an inner diameter of 95 mm and a listed weight of 800 g. The inner diameter refers to the interface with the tube, not the aperture of its objective lens.
The manufacturer states: Takahashi FC-76DS, FC-100 (all models except DL), and FSQ-85EDX telescopes. The FC-100DL is explicitly excluded from compatibility with this 95S version.
The one-piece collars described by Takahashi feature two 8.8-mm holes for mounting with two M8 screws on the brand’s mounts. The top surface features a 1/4-inch-20 TPI screw for parallel mounting. These specifications do not guarantee direct compatibility with all mounts: be sure to also check the mounting pattern.
Takahashi describes a cast aluminum construction with hand-finished details. Pieces of felt protect the optical tube where it contacts the collar. The weight of the mount must be taken into account when considering the entire setup; it does not replace the need to verify the mount’s load capacity.
| Features | Value |
|---|---|
| Reference | TKA21420 |
| Designation | 95S |
| Inner diameter | 95 mm |
| Weight | 800 g |
| Compatibility | Takahashi FC-76DS, FC-100 (all models except DL), and FSQ-85EDX telescopes |
A Takahashi 95S one-piece mount. Optical tube, mount, and camera not included. No additional plates or dovetails are listed for this model.
Manufacturer's part number: TKA21420. Takahashi's Official Profile.
Here are a few accessories we've selected for this model, depending on your needs.
Takahashi TKA37421 offset plate for the TKA21420 95S collar on the FSQ-85EDX; it helps balance the tube. The TKA21420S set and the FSQ-85EDX package with accessories already include both parts. Check the mount, mounting, and balance.
FSQ-85EDX tube only; the mounting clamp and its offset plate must be purchased separately. The accessory pack already includes the 95S set with the plate.
Takahashi S mount plate for the 95S one-piece collar on an EM-11 or EM-200 mount; separate parts. For the FSQ-85EDX, the TKA37421 offset plate is recommended for balancing. Check the fasteners, load, and assembly.
FSQ-80FC tube sold separately. Alternative to 95WB double clamps; the 95S protrudes beyond the tube section and prevents the anti-fog screen from retracting fully. Check the mounting plate and balance; the manufacturer recommends a separate KB-S plate.
