Takahashi 125WM double clamps for the TSA-120 and TSA-120FT. Inside diameter: 125 mm; weight: 1.3 kg; top plate included; does not include a bottom plate or dovetail.
CHF 438.00incl. Swiss VAT
Part Number TKA29420M
Will be ordered for you
Delivery time: 5 to 7 business days
Estimated shipping: Between November 23 and 24, 2026
The Takahashi 125WM double collars, part number TKA29420M, are designed for the TSA-120 and TSA-120FT telescopes. Their inner diameter is 125 mm, and the listed weight is 1.3 kg. The exact part number distinguishes this set from other clamps of the same diameter: their intended use and mounting plate should not be considered interchangeable without verification.
The set consists of two clamps and a top plate. The holes and threads on the extension plate allow accessories to be attached above the main tube, for example, for a photography setup or a parallel guide. The length of the extension plate depends on the tube model; no dimensions not listed in the spec sheet are extrapolated here.
The clamps are supplied without a bottom plate or dovetail. Takahashi recommends the M Plate (TMP02200) for this model. This recommendation does not mean that the plate is included. Another plate or dovetail can be used if its hole patterns and center distances match those of the collars and the chosen mount.
The construction uses cast aluminum with hand-finished details. Felt pads protect the optical tube from contact with the clamps. Before assembly, consult the official diagram of the mounting plate and clamp mounting holes to select the appropriate interface. Next, check the tightness and balance with the accessories actually installed. No tube, guiding instrument, or camera is listed as included with this kit.
| Features | Value |
|---|---|
| Reference | TKA29420M |
| Name | 125WM |
| Inner diameter | 125 mm |
| Weight | 1.3 kg |
| Compatible tubes | Takahashi TSA-120 and TSA-120FT Binoculars |
| Recommended turntable | M Turntable (TMP02200) |
Pair of clamps and top plate. Does not include a bottom plate or dovetail; optical tube and parallel accessories not included.
Here are a few accessories we've selected for this model, depending on your needs.
Takahashi 125WM double clamps for the TSA-120 and TSA-120FT, as an alternative to other mounts. Top plate included; bottom mount must be purchased separately. Check the fasteners, load capacity, and balance.
Takahashi 125WM double clamps for the TSA-120 and TSA-120FT, as an alternative to other mounts. Top plate included; bottom mount must be purchased separately. Check the fasteners, load capacity, and balance.
Takahashi Flat TMP02400 bottom plate, specified by the manufacturer for this model of clamps. The plate and clamps are sold separately; check the compatibility of the mount, hardware, load capacity, and balance. This is not a Vixen tail.
