Pair of 166WS clamps for the Epsilon-130D, inner diameter 166 mm, weight 1.6 kg. Top plate included; does not include a bottom plate or dovetail.
CHF 445.31incl. Swiss VAT
Part Number TKA69420S
Will be ordered for you
Delivery time: 5 to 7 business days
Estimated shipping: Between November 23 and 24, 2026
The Takahashi 166WS double clamps, part number TKA69420S, are designed to hold the Epsilon-130D telescope. The specified inner diameter is 166 mm, and the total weight of the assembly is 1.6 kg. Be sure to use this complete part number when making your selection: an identical diameter alone does not make two sets interchangeable.
The set includes two clamps and an upper mounting plate. The mounting plate has holes and threaded holes that allow accessories to be mounted parallel to the main tube. Its length varies by model; no dimensions not listed in the table have been estimated based on the photograph.
These clamps are supplied without a bottom plate or a dovetail. Takahashi recommends the Platine M interface (TMP02200) for this model. This recommendation does not mean that the interface is included. A different mounting solution requires drill holes and center distances that are compatible with both the collars and your mount.
The unit is made of cast aluminum and features hand-finished details. The contact surfaces are protected by felt. Before use, check the bottom mount, the tightness of the tube, and the balance with the accessories actually installed. The mounting holes on the top plate do not, by themselves, guarantee compatibility with every guiding instrument or camera.
| Features | Value |
|---|---|
| Reference | TKA69420S |
| Name | 166WS |
| Inner diameter | 166 mm |
| Weight | 1.6 kg |
| Compatible tubes | Takahashi Epsilon-130D Telescope |
| Recommended turntable | M Turntable (TMP02200) |
Pair of clamps and top plate. Does not include the bottom plate or dovetail; tube, mount, and accessories sold separately.
Here are a few accessories we've selected for this model, depending on your needs.
Epsilon-130D tube only, 166 mm diameter. The Takahashi 166WS clamps are sold separately from the tube and include an extension plate; be sure to use a bottom mount adapter compatible with your mount.
Takahashi Flat TMP02400 bottom plate, shown by the manufacturer with an Epsilon-130D and 166WS clamps on an EM-11. The plate and clamps are separate; check the mounting, hardware, load, and balance. This is not a Vixen tail.
