Takahashi FSQ-85EDX - 85 mm telescope tube only
FSQ-85EDX tube only; the mounting clamp and its offset plate must be purchased separately. The accessory pack already includes the 95S set with the plate.
CHF 3'299.00
Takahashi 95S Mount with Offset Base for the FSQ-85EDX. Mount has an inner diameter of 95 mm; EM-200 compatibility is documented for the base.
CHF 240.47incl. Swiss VAT
Part Number TKA21420S
Will be ordered for you
Delivery time: 5 to 7 business days
Estimated shipping: Between November 23 and 24, 2026
Part number TKA21420S combines a 95S clamp and an offset plate. This setup addresses the FSQ-85EDX’s balancing requirements as described by Takahashi: the forward-mounted mass and the short tube length limit the positioning options for a conventional mount. The offset plate allows the mount to be repositioned without adding a counterweight to the tube.
The manufacturer's table identifies the collar alone as TKA21420 and the plate as TKA37421. The 95 mm inner diameter and 800 g mass refer to the clamp alone, not the TKA21420S assembly. This distinction prevents the total load to be considered during installation from being underestimated; the total mass is not listed here.
The one-piece collar has two 8.8-mm holes for mounting with two M8 screws. Its top surface features a 1/4"-20 tpi screw for a parallel-mounted housing. The offset plate is documented as compatible with the EM-200. Check the mounting holes on the assembly before using it on another mount.
The design described by Takahashi uses cast aluminum and felt protective covers. The finishes are applied by hand. The optical tube and camera housing are included for illustrative purposes only and are not listed as included in the package. The complete list of fasteners included with this model has yet to be verified.
| Features | Value |
|---|---|
| Reference | TKA21420S |
| Together | 95S Collar with Offset Plate |
| Necklace with interchangeable components | TKA21420 |
| Inner diameter of the collar | 95 mm |
| Mass of the collar alone | 800 g |
| Component turntable | TKA37421 |
| Mounting bracket for the turntable | Takahashi EM-200 |
| Upper Clamp Mount | 1/4"-20 tpi screw |
95S collar with offset plate, as specified in the TKA21420S part number. Tube and camera housing not listed as included; exact hardware configuration to be confirmed.
Here are a few accessories we've selected for this model, depending on your needs.
FSQ-85EDX tube only; the mounting clamp and its offset plate must be purchased separately. The accessory pack already includes the 95S set with the plate.
FSQ-80FC sold separately. The set already includes the 95S clamp and the KB-S plate: an alternative to the 95WB clamps, so you don’t have to buy both parts twice. The 95S limits the dew shield’s full retraction; check the balance and mounting on the Takahashi mount.
