This PrimaLuceLab kit combines the GIOTTO 430 flat generator with the ALTO-3 motorized cover. It allows the panel to be used as a remote-controlled motorized cover.
CHF 1'682.42incl. Swiss VAT
Order No. FLAT-0024
Will be ordered for you
Timeframe: 10 days to 3 weeks
Estimated shipping: Between November 26 and December 1, 2026
This PrimaLuceLab kit combines the GIOTTO 430 flat generator with the ALTO-3 motorized cover. It allows the panel to be used as a remote-controlled motorized cover.
The part number refers to the GIOTTO 430 and ALTO-3 combination, not to a panel sold separately or a motor sold separately. Mechanical compatibility with the telescope must be verified during installation preparation.
The manufacturer's page for this set confirms the two devices and their use as a motorized lid. It does not specify the screws, clamps, adapters, or cables included in the package. These accessories are therefore not listed as included, based on an inference from another kit. The specifications for other GIOTTO models do not apply to this set.
| Reference | PLLGIOTTO430ALTO3 |
|---|---|
| Sign included | GIOTTO 430 |
| Motor included | ALTO-3 |
| Functions | Apartment Lighting and Motorized Opening/Closing |
PrimaLuceLab Official Fact Sheet
The GIOTTO panel provides diffused LED lighting with brightness adjustable across 100 levels, from 0 to 100 %. The flats are used to correct vignetting and dust shadows during image processing. GIOTTO and ALTO operate on 12 V and are controlled via USB-C from EAGLE or a Windows computer using PLAY or ASCOM-compatible software. Wi-Fi and the Virtual HandPad also allow control from a phone or tablet.
The motorized mechanism makes it easier to position the panel on flats, but it does not provide a light-tight seal for capturing darks. A separate library of darks is recommended. The mounting and clearance of the arm must be checked on the telescope; no clamps or additional adapters are listed as included unless specifically confirmed in the package contents.
The GIOTTO 430 has a 100-mm unlit central area and is not compatible with refracting telescopes. The reflector must have a suitable central obstruction. The outer diameter values listed on its product sheet are inconsistent: confirm the mounting specifications before installation.
Component Documentation: GIOTTO 430 and ALTO-3.
Manufacturer's illustration
