The PrimaLuceLab 200 mm anti-fog ring attaches around the tube to minimize condensation on the optics. Its specified mounting range covers tubes with diameters from 180 to 200 mm.
CHF 90.74incl. Swiss VAT
Reference CHAUF-0010
The PrimaLuceLab 200 mm anti-fog ring attaches around the tube to minimize condensation on the optics. Its specified mounting range covers tubes with diameters from 180 to 200 mm.
The elastic band and Velcro fastener ensure that it stays securely on the tube. The power supply is 12 V, and the current specified for this part number is 810 mA. This value is the one published for this specific model; it is not extrapolated from other diameters in the line.
The heating element is designed to be powered and controlled by EAGLE. It can also be connected to an external 12 V power source equipped with an RCA connector. The controller and power supply are not included with this heating tape model.
To select the correct size, use the outer diameter at the mounting point rather than just the optical diameter listed on the telescope. Refractors and Schmidt-Cassegrain telescopes are among the types of tubes recommended by the manufacturer for this purpose.
| Reference | PLLFAS200 |
|---|---|
| Nominal size | 200 mm |
| Pipe diameters | 180 to 200 mm |
| Voltage | 12 V |
| Rated current | 810 mA |
| Connection | RCA |
| Mounting | Elastic band and Velcro |
| Compatible order | EAGLE |
PrimaLuceLab Manufacturer Profile
Secure the strap around the tube using its Velcro fastener, then connect its RCA connector to a suitable 12-volt power source. With a compatible EAGLE unit and the ECCO2 module along with its probes, the heater’s power can be automatically regulated based on the dew point. These control devices are separate from the heater and are not included.
