PrimaLuceLab Vixen 240 mm Dovetail PLUS
PLUS 240 mm Vixen-style mount, an alternative to the Losmandy 240 mm. Check the clamping force, the spacing of the clamps, the load, and the balance.
CHF 65.62
These PrimaLuceLab PLUS support clamps are designed for optical tubes with an outer diameter of approximately 105 mm. They provide mounting points above and below the tube for rods and accessories.
CHF 233.08incl. Swiss VAT
Part no. COL-0006
Will be ordered for you
Timeframe: 10 days to 3 weeks
Estimated shipping: Between November 22 and 27, 2026
These PrimaLuceLab PLUS support clamps are designed for optical tubes with an outer diameter of approximately 105 mm. They provide mounting points above and below the tube for rods and accessories.
In particular, they allow for greater flexibility in mounting telescopes that were originally equipped with a photographic mount or a Vixen mount. Compatibility is determined by the actual outer diameter of the clamping area, not solely by the telescope’s brand name.
The upper and lower holes are designed to accommodate Vixen or Losmandy bars and PLUS guide clamps. A lower bar is used to connect the tube to the mount; an upper bar allows you to add accessories or reinforce the support. Center holes also allow for certain screw-based mounts with other brands. These assembly options do not mean that the bars, guide clamps, or clamps are included.
| Reference | PLLANSU105P |
|---|---|
| Target Tube Diameter | About 105 mm |
| Stated weight | 0.6 kg |
| Material | CNC-machined aluminum |
| Finish | Sandblasting and Hard Anodizing |
| System | PLUS |
PrimaLuceLab Official Fact Sheet
Official production photo: The dimensional variation is not visible in the image.
Here are a few accessories we've selected for this model, depending on your needs.
PLUS 240 mm Vixen-style mount, an alternative to the Losmandy 240 mm. Check the clamping force, the spacing of the clamps, the load, and the balance.
PLUS 240 mm Losmandy-style mount, an alternative to the Vixen 240 mm. Check the clamping force, the spacing of the clamps, the load, and the balance.
