PrimaLuceLab PLUS 20 mm spacers create clearance between two mechanical components, such as a mounting plate and support clamps.
CHF 51.38incl. Swiss VAT
Reference PLLSPES20
Will be ordered for you
Timeframe: 10 days to 3 weeks
Estimated shipping: Between November 26 and December 1, 2026
PrimaLuceLab PLUS 20 mm spacers create clearance between two mechanical components, such as a mounting plate and support clamps.
This offset is useful when parallel instruments or their accessories are too close together and might touch each other. The four holes maintain the mounting options of the PLUS system, with center-to-center distances adapted to the relevant Vixen bars, guide clamps, and Losmandy bars.
The screws must be longer than in an assembly without spacers: PrimaLuceLab specifies four M6 screws, each 35 millimeters long, for the entire assembly. These spacers adjust the mechanical height between mounts; they are not extension rings intended for the optical path. Check the mounting surfaces and the required clearance before assembling the setup.
| Reference | PLLSPES20 |
|---|---|
| Height | 20 mm |
| Vixen Center Distance and PLUS Guiding | 20 mm |
| Losmandy PLUS Center Distance | 55 mm |
| Screws included | 4 M6 screws, 35 mm long |
