Takahashi 80QS: 80 mm one-piece mount. Compatibility: Takahashi FS-60Q and FC-76DC telescopes. Weight: 500 g.
CHF 133.59incl. Swiss VAT
Part Number TKA20420Q
Will be ordered for you
Delivery time: 5 to 7 business days
Estimated shipping: Between November 23 and 24, 2026
Part number TKA20420Q, known as the 80QS, has an inner diameter of 80 mm. Takahashi lists the following compatible models: Takahashi FS-60Q and FC-76DC telescopes. Check the model and version before installation: the diameter alone is not sufficient to determine compatibility with all interfaces.
The standard one-piece collar is designed to secure the optical tube to a mount. Takahashi specifies a mounting surface with two 8.8-mm holes for attachment to its mounts using two M8 screws. Refer to the drawing for this part number to verify the center-to-center distances before choosing a different interface.
The small, flat top surface features a 1/4-inch-20 tpi photographic-threaded screw. It allows a housing to be mounted parallel to the tube. This 80QS version should not be confused with the 80S-GT symmetrical clamp, which has a different top base.
The collars are made of cast aluminum and finished by hand. The felt protects the surface of the optical tube. The listed weight for this model is 500 g. Check that your setup is securely fastened and properly balanced before use.
| Features | Value |
|---|---|
| Reference | TKA20420Q |
| Designation | 80QS |
| Inner diameter | 80 mm |
| Weight | 500 g |
| Compatibility | Takahashi FS-60Q, FC-76DC Binoculars |
80QS one-piece collar only. Optical tube, mount, and camera housing not included. The included mounting hardware is not specified.
Here are a few accessories we've selected for this model, depending on your needs.
Takahashi S TMP02300 mount plate for the EM-11 or EM-200 mount, with a one-piece clamp secured by two M8 screws. The mount plate and clamp are separate; check the hardware, load, and balance. It does not replace a Vixen tail.
Tubular eyepiece (sold separately) compatible with the Takahashi 80QS one-piece mount. The FS-60Q and FC-76DCU accessory kits already include this mount; check the mounting and balance.
Tubular eyepiece (sold separately) compatible with the Takahashi 80QS one-piece mount. The FS-60Q and FC-76DCU accessory kits already include this mount; check the mounting and balance.
