The ECCO-NTC adapter connects the thermistor in a Celestron Dew Heater Ring to the ECCO2 environmental controller. It allows you to use the temperature sensor built into the ring instead of an external probe attached to the optical system.
CHF 112.51incl. Swiss VAT
Reference PL1000061
Will be ordered for you
Timeframe: 10 days to 3 weeks
Estimated shipping: Between November 21 and 26, 2026
The ECCO-NTC adapter connects the thermistor in a Celestron Dew Heater Ring to the ECCO2 environmental controller. It allows you to use the temperature sensor built into the ring instead of an external probe attached to the optical system.
The ECCO2 housing is secured in the adapter with two grub screws. The 3.5 mm cable connects ECCO-NTC to ECCO2, while the 2.5 mm cable connects to the ring’s thermistor jack. The ECCO2 port number must match the EAGLE heating port used for this ring.
The two measurement cables listed in the table are included with the ECCO-NTC. The 12 V 5.5 / 2.1 mm to RCA power cable is listed as included with the Dew Heater Ring, and the USB cable is listed as included with the ECCO2. Neither the ECCO2 controller, nor the EAGLE computer, nor the heating ring are listed as included with this adapter.
| Reference | PL1000061 |
|---|---|
| Controller required | ECCO2 only |
| Not compatible | First-generation ECCO |
| Mounting | Vixen-Style Detector Mount |
| Mass | 40 g |
| Power supply | Provided by ECCO2 |
| Cable included 1 | 3.5 mm jack to 3.5 mm jack, 14 cm |
| Cable included 2 | 2.5 mm jack to 2.5 mm jack, 120 cm |
| Other items | ECCO-NTC, Quick Guide; two grub screws for mounting |
Here are a few accessories we've selected for this model, depending on your needs.
ECCO2 sold separately; required with ECCO-NTC and an EAGLE to use the thermistor on a Celestron ring. The adapter is not compatible with the first-generation ECCO; check the ports and cables.
Celestron heating ring sold separately: select the diameter and generation that match your telescope. For use with the ECCO2 thermistor, use the ECCO-NTC and the EAGLE heating power supply; check the connection.
EAGLE6 sold separately: When used with ECCO2 and a Celestron heating ring, it provides ECCO2-controlled heating output. Check the power supply, cables, and corresponding ports.
