WandererAstro FETA M92 - Motorized Focus and Tilt Correction
WSRK-E130 replacement kit required; check the draft and installation.
CHF 1'149.00
A compact astrograph for large nebulae and star fields: the Epsilon-130D features a 130 mm aperture, a 430 mm focal length at F/D 3.3, and a corrected 44 mm image circle. Integrated corrector, rotating framing collar, and TEK13010 tube-only version.
CHF 2'228.46incl. Swiss VAT
Part Number TEK13010
Will be ordered for you
Delivery time: 5 to 7 business days
Estimated shipping: Between November 23 and 24, 2026
The Epsilon-130D combines a 130-mm diameter with a 430-mm focal length and an F/D ratio of 3.3. This short focal length is well-suited for photographing extensive nebulae and wide-field star fields. Part number TEK13010 refers to the optical tube only; it must be paired with your own mount and imaging equipment.
The hyperbolic primary mirror works with a plane secondary mirror and a corrector integrated into the rack. This modified hyperbolic Newtonian design provides a corrected image circle of 44 mm. The corrector is part of the tube’s optical system; the photographic adapters are selected based on the camera or body being used.
The 56.2 mm backfocus defines the working distance to be maintained according to the Takahashi scheme. The rings, filter holder, and housing must be taken into account in this calculation, as well as in the available aperture diameter for the sensor. The wide-field T rings and the 1.5× Epsilon extender specific to the 130D are separate options from the native configuration.
The rotating collar integrated into the rack allows you to adjust the field of view. The reinforced spider supports the secondary mirror and minimizes flexing. Markings on both mirrors allow you to check collimation during the day using the appropriate Takahashi tools, following the procedure for the 130D.
The tube is 460 mm long and 166 mm in diameter, with a mass of 4.9 kg. Its front end has a diameter of 188 mm. To select the mount and balance the setup, add the mass of the clamps and the camera assembly to that of the tube.
Epsilon-130D optical tube (TEK13010) with built-in corrector. The mount, camera, clamps and their mounts, T-ring, and extender must be selected separately. The collimation tools listed above are optional.
Takahashi TEK13010 Official Spec Sheet ; Takahashi 2025 Catalog, PDF page 33.
With a 130 mm aperture at f/3.3 and a focal length of 430 mm, it is primarily an astrophotography instrument: when paired with a camera, it is designed to photograph large nebulae, the Milky Way, and massive clusters across a very wide field of view.
Yes, it's a lightweight instrument: the tube weighs about 4.9 kg and is about 46 cm long.
Yes, just like any wide-aperture Newtonian—and with precision, because astrophotography at f/3.3 leaves little room for error. Takahashi offers the Takahashi TKA00442 collimation tube.
Yes, that’s what it’s designed for: it mounts on a motorized equatorial mount (not included) with an astro camera or a regular camera. With an aperture of f/3.3, it gathers light very quickly, so exposure times remain short. With a tube weighing approximately 4.9 kg (without accessories), choose a mount with a load capacity that leaves some margin.
Here are a few accessories we've selected for this model, depending on your needs.
WSRK-E130 replacement kit required; check the draft and installation.
Takahashi 166WS collars designed for the Epsilon-130D. The extension plate is included; a bottom mount adapter suitable for the mount must be purchased separately.
Takahashi 1.5× extender designed for the Epsilon-130D to provide a tighter field of view. It replaces the original corrector; check the connections, the focus adjustment, and compatibility with your FETA focuser, if installed.
Takahashi Flat TMP02400 bottom plate, shown by the manufacturer with an Epsilon-130D and 166WS clamps on an EM-11. The plate and clamps are separate; check the mounting, hardware, load, and balance. This is not a Vixen tail.
Recommended diameter: 190 mm. Check the measurement and the mounting.
Recommended diameter: 200 mm. Check the measurement and the mounting.
Rotateur Lite V2 is possible; check the connection, the corrector, and the draft.
