Antlia LRGB-V Pro Filter Set
Price range: CHF 257.40 through CHF 643.50
CHF 629.00incl. Swiss VAT
Will be ordered for you
Delivery time: 5 to 7 business days
Estimated shipping: Between November 11 and 12, 2026
Visit Uranus-M Pro is Player One's new monochrome cooled camera (sensor Sony IMX585 1/1.2″8.3 MP, 2.9 µm pixels). Designed for performance and reliability, it combines a 2-stage TEC cooling (Delta-T up to 35-40 °C), a lightweight carbon-fiber chassisa integrated anti-fog system and a tilt plate front 3P + rear 4P for precise adjustment of field flatness. Its on-board electronics 512 MB DDR3 cache for stable, lossless image acquisition, and the IMX585 sensor exploits STARVIS 2 for high sensitivity and low read noise.
With its full-well of 47 ke- (i.e. ~3.6 × IMX485), a throughput up to 47 fps in RAW8 and the absence of amp-glow (non-amp-glow), the Uranus-M Pro delivers a clean sky background and sharp stars, whether for narrowband/LRGB deep-sky imaging or wide-field mosaics. Its 1/1.2″ format also makes it easier to capture the entire solar or lunar disk using a short focal length.
| Body | Aluminum + carbon fiber, red/black |
|---|---|
| Tilt plates | Front 3P (mounted) & rear 4P (included) |
| Data ports | 2× USB Type-C (main USB 3.0) |
| Power supply | 12 V DC, 5.5 × 2.1 mm (recommended 12 V / 5 A) |
| Weight | ≈ 420 g |
| Compatibility | 1.25″ / 2″ filter wheels/drawers, OAG, RASA (rear tilt recommended) |
Note: the12 V power supply not included. Recommended block: 12 V 5 A 5.5 × 2.1 mm.
The Uranus-M Pro is supplied with a front tilt plate 3P (installed) and a back plate 4P (included). The 3P covers most cases (single optical train). The 4P is ideal if you're using a filter wheel/drawer + OAG fixed-angle, or critical optics such as the RASA. A high-density foam gasket prevents lateral light leakage.
The port USB-C 3.0 provides full frame rate (up to ~47 fps in RAW8). The 512 MB DDR3 stabilize the stream to prevent image drop-outs and reduce playback noise due to transfer variations. The camera can operate on a basic USB 2.0 port, but to get the most out of it, opt for USB 3.0 and a USB 2.0 port. Fast SSD for recording.
The Uranus-M Pro integrates easily into standard light trains BFL 55 mm with a filter wheel or 1.25″/2″ filter drawer and OAG. Some combinations may require 56 mm to compensate for filter thickness. Check the optical lengths of each ring and accessory in your setup.
12 V 5 A power supply not included.
Is the power supply included? No. Use a 12 V / 5 A (DC 5.5 × 2.1 mm plug) for TEC cooling.
Can I use it without cooling? Yes. Connected only to the main USB-C port, the camera can function as an uncooled camera.
What type of storage do you recommend? A Fast SSD to support high acquisition speeds.
Is the camera suitable for RASA? Yes, give priority to rear tilt plate 4P for fine adjustment and optimum flatness.
Need advice on integration (BFL, filter wheel, OAG, corrector)? We can help you set up a clean, high-performance optical chain with the Uranus-M Pro.
The Player One Uranus-M Pro is designed for deep-sky photography using long exposures: nebulae, galaxies, and clusters. Its cooling system (35 °C below ambient temperature) keeps thermal noise very low during exposures lasting several minutes. With its 2.9 µm pixels, it pairs well with instruments with focal lengths of approximately 300 to 600 mm (1 to 2″ per pixel). In monochrome mode, it can be used with LRGB or narrowband filters (Hα, OIII, SII) and remains effective under urban skies. Its frame rate of 47 frames per second also makes it suitable for imaging the Moon and planets (and the Sun with an appropriate solar filter).
The Sony IMX585 (STARVIS 2 technology) combines very low readout noise (0.7 e⁻), high well capacity for 2.9 µm pixels (47 ke⁻), and high sensitivity in the near-infrared. With no amp glow and a fast frame rate (47 frames/s), it is a highly versatile sensor, suitable for everything from planetary to deep-sky imaging, offering excellent value for the price.
The cooling system requires an external 12 V DC power supply with a minimum current rating of 5 A (maximum power consumption: 3 A). It is not included with the camera: we recommend the'Pegasus Astro 12 V 10 A power supply (2.1 mm plug). In the field, a Pegasus Astro unit like the Pocket Powerbox Advance It also powers the mount and the heating elements from a single source. Without a 12-volt power supply, the camera operates via the USB cable, but without cooling.
The camera's back focus is 17.5 mm. Mount: 1.25″; M42 × 0.75. If using a corrector or reducer that requires 55 mm, make up the difference with extension rings, taking into account the filter wheel or filter drawer, if present.
To take color photos with the Player One Uranus-M Pro, you need a filter wheel: for this sensor, the Player One Phoenix 8 × 1.25″ Filter Wheel is suitable. When it comes to filters, we recommend the Antlia line: the Antlia LRGB-V Pro Kit for galaxies and clusters, and filters Antlia Hα Pro 3 nm, OIII Pro 3 nm and SII Pro 3 nm For narrow-band nebulae, choose the 1.25″ mounted version.
With a Player One FHD-OAG MINI Optical Splitter and a small guidance camera like the Player One Xena 585M, you guide through the main telescope. A guide scope such as the'Askar 32 mm is the simplest alternative.
An anti-fog heating element is built into the front of the sensor window. It prevents fogging and frost when the sensor is cooled well below room temperature.
The monochrome version is more sensitive and produces better results in narrowband, but it requires a filter wheel. The color version, the Player One Uranus-C PRO, produces a color image in a single exposure.
The manufacturer's data sheet (in English) is available here: Player One Uranus-M Pro Spec Sheet.
Here are a few accessories we've selected for this model, depending on your needs.
Player One Phoenix 8×1.25″ wheel, an alternative to the 2″ wheel. It requires 1.25″ filters, sold separately: the 2″ filters already offered are not compatible with this wheel. Check the sensor, the connectors, and the draft; vignetting depends on the beam and the distance to the sensor.
Player One FHD-OAG MINI splitter for this camera, an alternative to the MAX model. Guide camera sold separately; verify compatibility with the selected wheel or drawer, prism, and draw.
Player One MINI drawer for manually changing one filter at a time, as an alternative to a motorized filter wheel. Filters sold separately; check the filter holder size, cell, connections, and draft.
Player One LRGB S-Series 1.25-inch set, available as an option for the Phoenix 8×1.25 wheel already offered. Four separate filters; different format from 2-inch filters. Check the focal length and vignetting depending on the beam.
