CHF 1'409
Available by special order — estimated delivery time: 2 weeks
Visit ToupTek ATR2600M (ref. ATR3CMOS26000KMA) is the monochrome version of the ATR2600C. It is based on the Sony IMX571 APS-C, backlit (BSI), with a Native 16-bit ADCa ultra-low read noise (up to ~0.77 e- in Low Noise mode), a full-well up to 51 ke- (and up to 100 ke- in High Full Well mode), a 512 MB DDR3 buffer and a two-stage TEC cooling system down to -42°C below ambient - delivering deep, amp-glow-free monochrome images with exceptional dynamic range.
| Sensor | Sony IMX571 mono BSI (APS-C, 28.3 mm diag.) |
|---|---|
| Resolution | 6224×4168 (~26 MP) |
| Pixel | 3.76 µm |
| ADC | 16-bit (Low Noise / High Full Well) |
| Playback noise | ~0,77→2,77 e- |
| Pleine-puits | 51 ke- (100 ke- HFWH) |
| Max. dynamics | ~14 stops |
| Cooling | 2-stage TEC, ΔT down to -42 °C |
| Buffer memory | 512 MB DDR3 |
| USB 3.0 speed (full sensor) | 6.8 fps (16-bit), 13.2 fps (8-bit) |
| Anti-fog | Heater with adjustable levels (~5 W) |
| Assembly | M42×0.75 + 2″ adapter |
| Backfocus | 17.5 mm |
| Interface | USB 3.0 / USB 2.0 hub |
| Power supply | 12 V ⎓ 3 A |
| Dimensions / Weight | Ø 80 mm × H 107.1 mm - ≈ 577 g |
| Compatibility | ASCOM/INDI, N.I.N.A, SharpCap, PixInsight, etc. |
| Resolution | 16 bits | 8 bits |
|---|---|---|
| 6224×4168 | ~6.8 fps | ~13.2 fps |
| 3104×2084 | ~28 fps | ~37.1 fps |
| 2064×1386 | ~63 fps | ~110 fps |
If you're looking for a **cooled APS-C** monochrome camera with **real 16-bit**, **exceptional dynamic range**, **ultra-low noise**, **high-performance cooling**, **anti-fog**, and **zero amp-glow**, the **ATR2600M** offers outstanding performance on nebulae and galaxies, while remaining reliable and fluid thanks to its DDR3 buffer and scalable frame rates.
